Light Indicator Status - Eiki EK-510U Owner's Manual

Light indicator status

Check light indicator to learn status of your projector.
Light indicator
STATUS
POWER
Green /Red
Green
...
... Flashing green
78
Appendix
FILTER
Your projector is in Off status (without AC power supply).
Your projector is in standby status. Press Standby button to turn it
on.
Your projector is in normal status.
It is ready for standby or the lamp is cooling. You may power on
your projector only after the lamp is fully cooled and the POWER
light indicator stops flashing.
Your projector is in Ready mode.
Your projector detects abnormal situation and cannot power on.
Unplug the AC power cord and connect it again before powering
on your projector. If it powers off again, please unplug the cord
and call your dealer or service center for maintenance or inspec-
tion. Do not let it continue operating as this may lead to electric
shock or fire.
Your projector detects lamp abnormality and cools down.
Your projector detects lamp abnormality and switches into stand-
by mode.
Your projector cannot power on, as its internal temperature is too
high. You may power it on after it is fully cooled, temperature
backs to normal, and the POWER light indicator turns red.
You may power is fully cooled with temperature backs to normal.
The lamp cover is not fully closed.
The filter requires cleaning
Red
...
... Flashing red
Status of your projector
Orange
...
... Flashing orange
... Turns off