Expand; Language; Auto Setup - Eiki EK-510U Owner's Manual

Expand

Select the Expend menu to set up other functions of your projector.
1. Press the MENU button on remote controller and the OSD displays. Press
Expand icon, press
2. Press button to point to required item, press
tion.
3. Press button to point to required item, press OK button to confirm your selection.

Language

This projector provides multi-language screen
menu.
You can press button to select the language
you want: English, German, French, Italian,
Spanish, Polish, Swedish, Dutch, Portuguese,
Japanese, Simplified Chinese, Traditional
Chinese, Korean, Russian, Arabic, Turkish,
Finnish, Norwegian, Danish, Indonesian,
Hungarian, Czech, Kazakh, Vietnamese, Thai
and Farsi.

Auto setup

Press AUTO button on the remote control to
execute "Input search", "Auto PC adj." and
"Auto keystone" functions.
Input search
Allows you to automatically detect input
signals. It stops when a signal is found. Press
 button to select an option below:
On ...... Enabled.
Off ......Disabled.
Auto PC adj.
On ...... Press the AUTO button on the remote
control to enable Auto PC adj. function
automatically.
Off ......Cancel Auto PC adj. function.
Auto keystone
Auto ... When detecting the projector is tilted,
correct the vertical keystone in real time.
Manual When pressing AUTO button on the
remote control, perform a vertical
keystone.
Off ......Disabled.
OSD setting-Expand
button or OK button to enter the submenu.
button or OK button to confirm your selec-
Expand menu
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Auto setup
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Note:

- "Input search", "Auto PC Adj." and "Auto Keystone"
cannot be set to "Off" at the same time. At least
one of them is set to "On".
- Sometimes the auto keystone maybe correct
image imperfectly, manual keystone is required.
- The Auto keystone function cannot work when
"Display" → "Project way" is set to "Ceiling/
Front" or "Ceiling/Rear".
button to select
45