Factory Default; Lamp Counter - Eiki EK-510U Owner's Manual

(3) When DHCP is set On, IP address, Subnet,
Gateway and DNS will be obtained
automatically, press the OK at "Set" to confirm
the parameters.
When DHCP is set Off, press the OK button to
enter IP address, then press  button to enter
Subnet, Gateway and DNS respectively,
press the OK at "Set" to confirm the parameters.
 Note:
See page 56 for usage of Network.

Factory default

This function returns all setting values except
for the PIN code lock, Logo PIN code lock,
Lamp counter and Filter counter to the factory
default settings.
 Note:
The captured user logo image is deleted
when factory default is executed.

Lamp Counter

This function resets the counter of Lamp usage
hours. Please be sure to reset the lamp counter
after replacing the lamp. WARNING indicator turns
Off and the lamp replacement icon disappears
after reset the lamp counter.
Press < MENU > button on the remote controller
or on the control panel to display the OSD menu.
Press button to select the Expand menu, then
press <OK> or button.
1) Press button to select [Lamp counter]
menu.
2) Press <OK > button.
3) Press button to select [Lamp counter reset],
then press <OK> button.
4) " Lamp replacement counter reset ? "
conformation box appear.
5) Select "Yes" and Press <OK> button.
52
OSD setting-Expand
LAN
Network setting
DHCP
IP address 192
192
Subnet
255
Gateway 192
DNS
192
Move Next
ENTER
ENTER
Factory Default
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Lamp Counter
Expend
Language
Auto setup
Keystone
Logo
Security
Power management
Filter counter
Test pattern
Network
Factory default
Lamp counter
Off
168 1 100
168 1 100
255 255 0
168 1 1
168 1 1
Cancel
Set
Back
MENU