Replacing The Cbm For Raid Models; Replacing The Flash Backup Module - Infortrend EonStor GS 3000 Series Hardware Manual

Replacing the CBM for RAID Models

WARNING
Make sure you have the replacement module(s) on-hand before you attempt to
replace the CBM.

Replacing the Flash Backup Module

Upgradeable / replaceable component is listed below:

Flash Backup Module (FBM): In the event of a power failure, the
combination of super capacitor + FBM (non-volatile flash storage) can store
the data, indefinitely.
Make sure you have the replacement module(s) on-hand before you attempt
the replacement procedure.
Make sure the flash backup module has been installed before installing the
super capacitor. Please refer to procedures mentioned in
section.
The super capacitor and flash backup module can sustain and transfer cached data
to a flash backup module in the event of a power outage or in the unlikely event of
both PSUs failing for permanent storage.
The super capacitor and flash backup module might be optional for some models
and in various sales regions.
WARNING
110
Installing the BBU