Single-Controller Models; Upgrading Single-Controller To Dual-Controller System; Connection Between Raid And Jbod - Infortrend EonStor GS 3000 Series Hardware Manual

Single-Controller Models

Single-Controller models are designated by a "G" or "S" in their model number. The
second controller slot is filled with a dummy cage.

Upgrading Single-Controller to Dual-Controller System

If the model name of a Single-Controller RAID/JBOD is designated with the letter "S",
it can be upgraded into a Dual-Controller configuration by adding another controller
module and firmware upgrade (see software manual). If the model name is
designated with a "G", it is not upgradeable to a Dual-Controller configuration.
For details, please contact your vendor for details.

Connection between RAID and JBOD

The following rule applies when connecting RAID and JBOD(s):
 Dual-Controller RAID system connects to Dual-Controller JBOD.
 Single-Controller RAID connects to Single-Controller JBOD.
A
EonStor GS 3012 / 3024B
A
EonStor GS 3016
19