Table of Contents
Advertisement
4.1.1
Replacing the memory module
The system comes with a pre-installed SO-DIMM module(s). You can upgrade them or replace when the
bundled modules malfunction.
IMPORTANT! Contact your system vendor to help you purchase the compatible modules.
NOTE: Refer to section ESD precautions for safety information.
To replace the memory module:
1.
Shut down your system. Wait for a minute for the remaining electric current to dissipate.
2.
From the left side panel, loosen the screws (A), then pull to remove the left side cover (B).
3.
Remove the memory modules from the DIMM slots.
4-2
DIMM slots
DIMM modules
Chapter 4: System maintenance
Hide quick links:
Advertisement
Table of Contents
