High Availability Ip San With Redundant Raid Controller - Infortrend EonStor GS 3000 Series Hardware Manual

High Availability IP SAN with Redundant RAID Controller

LD 0
CH0 AID*
CH0 BID
Component
RAID system
HBA
GbE cables
GbE switch
Software
RAID
configuration
HBA
EonPath
VLAN 0
7 x 8x 9 x 10 x 11x 1 2x 7x 8x 9x 1 0x
C
7 8 9 1 011 1 2
A 1 2 3 4 5 6 1 x 2x 3 x 4x 5x 6x 1x 2x 3x 4 x
A B
CH0 CH1 CH2 CH3
LD 1
CH1 AID*
CH1 BID
iSCSI RAID managed by redundant RAID controllers,
with a total of 8 host ports
iSCSI initiators, preferably PCI-E TCP/IP offload engine
(TOE) capable cards
GbE network cables
Ports divided into 2 virtual LANs to separate access from
host to targets.
EonPath to manage the fault-tolerant paths with failover/
failback and load balance capabilities. Use EonPath
multipath software so that your operating system can
identify alternate paths to the same logical drive.
Remote replication functionality is not supported
using this configuration. For remote replication
66
EonPath
VLAN 1
11x 12x
5x 6 x
CH0 CH1 CH2 CH3
LD 2 LD 3
CH2 BID* CH3 BID*
CH2 AID CH3 AID
Description