KEB COMBIVERT F5 Instruction Manual page 18

Operator Parameters
Standard value:
Notes:
Name:
Meaning:
tor.
Combivis-
Parameteraddress:0289h
SDO-Index:
SDO-Subindex:
Data length: 2 Byte
Access:
Coding:
Standard value:
Notes:
Name:
Meaning:
Combivis-
Parameteraddress:0290h
SDO-Index:
SDO-Subindex:
Data length: 2 Byte
Access:
Coding:
Standard value:
Notes:
18
Bit4: Reset of the Fieldbus-Watchdog, if the Powerlink-status (FPGA)
is operational.
07h
A new value takes effect immediately and is stored non-volatile.
FBS Config (Fb09)
Serves for configuration of some special functions in the Powerlink opera-
2289h
0
READ_WRITE
Bit coded:
Bit0: = 1: Switches automatically into the synchronous-mode, if the
Powerlink (FPGA) changes into state operational.
= 0 : No activation of the synchronous-mode possible.
0000h
A new value takes effect immediately and is stored non-volatile.
PD_In_Cycle (Fb16)
Displays the cycle time the PDIN data are read by the FI, in order
to transmit the data to Powerlink. This parameter adjustment has no
effect in the synchronous mode. In synchronous mode the PDIN data
are read once by the FI with each SoC cycle.
2290h
0
READ_WRITE
1 ms
25 ms
A new value takes effect immediately and is stored non-volatile.