Normal Operation - ORiNOCO 200 User Manual

Device does not power up
Description
Impact
Action

Normal Operation

Description
Impact
Action
Device has not been powered up correctly. Possible reasons
for this state include:
defective power supply
defective board
No communication - No Light Activity
Verify the connection of the power adapter to ensure:
The power adapter is connected to your Access Point.
The power adapter is connected to the wall outlet.
If this doesn't solve your problem, contact ORiNOCO
Technical Support at 1-866-674-6626 (prompt 2). Have your
serial number handy. The serial number should be on the
identification label located on the bottom panel of the unit,
labeled "Sn", and conform to the following format:
yyAAxxxxxxxx
. Technical Support will be unable to
respond to your inquiry without this information.
Hardware and software OK. Interface has initialize
successfully.
None.
None.
Troubleshooting
8-7