Basic Settings - ORiNOCO 200 User Manual

Basic Settings

Overview
There are two categories of basic settings for the Access Point 200 which
you may change to suit your networking needs.
Internet Address (TCP/IP) Settings
Wireless Settings
Internet Address (TCP/IP) Settings
Check with your system administrator to find out your static address
settings.
Access Point IP Address - a unique numeric value assigned to
your Access Point to identify it from other computers on the
Internet. It is similar to that of a telephone number assigned to your
telephone.
Access Point Subnet Mask - works with the IP Address to
indicate the logical location (Subnet) of a networked device, similar
to an area code that identifies the geographical region of a
telephone. If the IP Address was assigned to you by your network
administrator, this field must be populated with a Subnet Mask
value.
5
5-1