Common Troubleshooting Tips - ORiNOCO 200 User Manual

Troubleshooting

Common Troubleshooting Tips

If you encounter difficulty using and/or installing your Access Point, please
check the following:
1. Verify that the Power light is On.
2. Check that all your cables are securely plugged into the unit.
3. Verify that you are using the correct type of cable. The blue cable that
came with your device is a straight-through cable and should be used to
connect the lower LAN port on your Access Point to your wired LAN.
4. Verify the correct web address has been entered: 169.254.0.2
5. Turn Off Proxy Server On Your Web browser before trying to access the
Management Tool (part of this chapter).
6. Verify that the Network Name (otherwise known as SSID) of your
wireless computers match the Access Point. The Network Name is
located on the bottom panel of your Access Point and is case sensitive,
so be sure and type it exactly as printed.
7. Verify that the Encryption Key(s) of your wireless computers match the
Access Point Encryption Key(s).
8. Verify Computer Settings (part of this chapter).
8
8-1