Hardware Reset Button - ORiNOCO 200 User Manual

/05&
All information is case sensitive. It is recommended that you write
this information down before mounting your unit.
My identification values are:
Gateway Module Name =
Network Name =
Part number and revision (Pn) =
Serial Number (Sn) =

Hardware Reset Button

This is not the same button as the small push button on the back
panel of the unit. The hardware reset button is located on the bottom panel
of the unit and can be accessed with the tip of a pen or the tip of a paper
clip.
Table 2-6 Hardware Reset Button
Hardware Reset Button For easy identification, this button is labeled "RESET" on
the bottom panel of the unit. A hardware reset can be used
to recover from a situation where the Access Point has
become unresponsive. A hardware reset has the same
effect as disconnecting/re-connecting the power to the unit.
To perform a hardware reset, depress the button and
release.
Hardware Description
2-11