Table of Contents
Advertisement
Table 2-2
Back Panel Description Table
a. Reload Push Button
b. Power Supply Plug
c. LAN Ethernet port
d. LAN Ethernet port
For easy identification, the small push button is labeled
"RELOAD" on the back panel of the unit, just above the
power supply plug. The small push button has three functions
- revert to last known good configuration, reload to factory
defaults, and reload Access Point 200 software. These three
functions are detailed in this chapter.
For easy identification, the power supply plug is labeled "9V
1.1 A" on the back panel of the unit.
For easy identification, the LAN Ethernet port is labeled
"LAN" and colored blue on the back panel of the unit.
This is the lower LAN Ethernet port.
Hardware Description
2-5
Advertisement
Table of Contents
