Reset To Factory Defaults - ORiNOCO 200 User Manual

System Tools
Upgrade Access Point Software
Use this screen to upgrade your Access Point software. Select the browse
button to find the version on your computer that you want to upgrade. This
could be software that you have just downloaded from your manufacturer's
website. Click the Upgrade button and the new software will be uploaded
and installed. You must reboot your Access Point for this change to take
effect.
Figure 7-2 Upgrade Access Point Software - Tools Page

Reset to Factory Defaults

You will return your device to its original factory 'out of box' configurations.
This places your device into a known working state in the event that your
unit appears unusable.
7-4