Web Access - ORiNOCO 200 User Manual

System Tools
Figure 7-3 Reset to Factory Defaults - Tools Page

Web Access

Use this screen to change your username and password. A username and
password are necessary to access your device and modify configuration
profiles. The username and password is the same for both the web
interface and the terminal access (CLI). Your Access Point must be
restarted for this to take effect in both the web interface and CLI
administrations.
The default username for your Access Point is admin. There is no default
password, therefore you may leave this field empty. However, if you do not
choose a password for your Access Point, it will not be protected against
access by other users.
7-5