Reset; Help Link - ORiNOCO AP-600 User Manual

Hide thumbs Also See for AP-600:
Table of Contents

Advertisement

Commands

Reset

Use the Reset tab to restore the AP-600 to factory default conditions. The AP-600 may also be reset from the RESET
button located on the side of the unit. Since this will reset the Access Point's current IP address, a new IP address
must be assigned. Refer to
CAUTION
!
Resetting the AP-600 to its factory default configuration will permanently overwrite all changes that have made
to the unit. The AP-600 will reboot automatically after this command has been issued.
Figure 6-6
Reset to Factory Defaults Command Screen

Help Link

To open Help, click the Help button on any display screen.
During initialization, the AP-600 on-line help files are downloaded to the default location:
C:\Program Files\ORiNOCO\AP600\HTML\index.htm.
The ORiNOCO AP-600 Help information is available in English, French, German, Italian, Spanish, and Japanese. The
Help files are copied to your computer in all six languages.
If you want to place these files on a shared drive, copy the Help Folder to the new location, and then specify the new
path in the Help Link box.
Figure 6-7
Help Link Configuration Screen
Recovery Procedures
for more information.
85

Advertisement

Table of Contents
loading

Table of Contents