Safety Information - Siemens SINAMICS S120 Equipment Manual

4.5.2

Safety information

Danger
The 50 mm clearances above and below the components must be observed.
Notice
Only one measuring system can be connected to each Sensor Module.
Only measuring systems in which the measuring system power supply is not grounded may
be connected.
Caution
When you use screw terminals, the signal cable must be shielded and connected to the
shield contact with the greatest possible surface area.
Equipment Manual Control Units and Additional System Components
Equipment Manual, (GH1), 12/2004 Edition, 6SL3097-2AH00-0BP1
Encoder System Connection
4.5 Sensor Module Cabinet 30 (SMC30)
4-21