Siemens SINAMICS S120 Equipment Manual page 4

SINAMICS -Documentation
®
Printing History
Brief details of this edition and previous editions are listed below.
The status of each edition is shown by the code in the "Remarks" column.
Status code in the "Comments" column:
A New Documentation
B Unrevised reprint with new order no.
C Revised edition with new status
If factual changes have been made on the page in relation to the same software version, this is indicated by a new edition coding in the
header on that page.
Edition Order No.
12.04 6SL3097-2AH00-0BP1
Trademarks
SIMOVERT , SIMATIC , SIMATIC HMI
® ®
Siemens AG. The designations in this documentation whose use by third-parites for their own purpose may infringe the rights of the
owner.
For further information please visit us at::
http://www.siemens.com/motioncontrol
This publication was produced with SIPS+
The reproduction, transmission or use of this document or its contents is
not permitted without express written authority. Offenders will be liable for
damages. All rights, including rights created by patent grant or registration
of a utility model or design, are reserved.
© Siemens AG, 2004. All rights reserved
Order No. 6SL3097-2AH00-0BP1
Printed in Germany
, SIMATIC NET , SIMOTION
® ®
We have checked that the contents of this document correspond to the
hardware and software described. Since deviations cannot be precluded
entirely, we cannot guarantee complete conformance. However, the data in
this manual is reviewed regularly and any necessary corrections included in
subsequent editions. We are thankful for any recommendations or
suggestions.
We reserve the right to make technical changes.
Siemens Aktiengesellschaft
Comments
C
, SINUMERIK and SINAMICS
® ®
are registered trademarks of
®