Installation - Siemens SINAMICS S120 Equipment Manual

Encoder System Connection
4.4 Sensor Module Cabinet 20 (SMC20)
4.4.5

Installation

Installation
1. Place the component on the DIN rail.
2. Snap the component on to the DIN rail. Make sure that the mounting slides at the rear
3. You can now move the component on the DIN rail to the left or to the right to its final
Removal
Figure 4-9 Releasing the component from a DIN rail
4-18
latch into place.
position.
Equipment Manual Control Units and Additional System Components
Equipment Manual, (GH1), 12/2004 Edition, 6SL3097-2AH00-0BP1