31 March 1987
INSTALLATION PROCEDURE
1.
Turn off the main switch and unplug the
power supply cord of the copier.
2.
Remove the receiving tray [A] and rear
cover [B] of the copier (3 screws).
3.
a.
Remove the five plastic caps [C] from
the left cover.
b.
If the duplex unit is installed, remove the
tray supporter [D], three plastic caps [E],
and two truss screws [F] from the du-
plex unit.
4.
Install the sorter adapter as follows:
(Duplex unit not installed)
a.
Screw in the lower mounting studs [G].
b.
Screw the M4 x 8 screws halfway into
the mounting studs.
c.
Hook
the
sorter
screws, and tighten the screws to fix the
adapter.
1-48
adapter
[H]
on
the