Ricoh FT556 Service Manual page 93

5. Secure the following items with tape:
T/S corona release lever to the drum
stay knob
Transport plate to the toner collec-
tion bottle cover
Toner shield glass
1st and 2nd feed guide plates
6. Remove the LCT if it is installed in the
5th feed station.
7. Secure the LCT covers and power supply
cord with tape.
8. Separate the system into the two units
as follows:
Paper Bank and System Table
Copier, duplex unit and/or document
feeder
9. Tape the bank interface harness and ac
harnesses to the top of the bank.
1-82