Ricoh FT556 Service Manual page 43

31 March 1987
34. Install one toner cartridge [A].
Confirm that the toner cartridge gear is
properly engaged by attempting to
rotate the cartridge counterclockwise.
When the toner cartridge gear is proper-
ly engaged, the toner cartridge will not
rotate freely.
35. 240 volt areas only:
Remove the copier rear cover (3 screws),
disconnect the wire from the 220-volt termi-
nal [B], and connect it to the 240-volt termi-
nal [C] as shown. Reinstall the copier rear
cover.
1-32