Bin Drive Motor Replacement - Ricoh FT556 Service Manual

2. BIN DRIVE MOTOR REPLACEMENT

1. Remove the drive belt. (See the preceding
procedure.)
2. Disconnect the 3p connector [A] from the
sorter control board.
3. Remove the helical wheel cover [B] (1
screw).
4.
Disconnect the 2p connectors [C] from the
motor capacitor [D] and the connectors [E]
from the overrun switch [F].
5. Remove the cable tie [G].
6. Loosen the 4 mounting screws [H] of the
bin drive motor [I].
7. Remove the bin drive motor.
3-63