Bin Replacement - Ricoh FT556 Service Manual

31 March '87

3. BIN REPLACEMENT

When reinstalling the bins, first remove the drive
belt.
1. Remove the front and the rear covers (2
screws each).
2.
Remove the helical wheel cover [A] (1
screw).
3. Slightly move both helical wheels [B] away
from the sorter after removing the 2 helical
wheel bracket [C] fixing screws.
4. Remove the upper cover [D] (2 screws
each side).
5. Lift up the bin unit [E].
6. Remove one of the screws from the upper
shaft [F].
7. Remove the bin unit at an angle.
3-64