Ricoh FT556 Service Manual page 164

6.
Unhook the spring [A] and take off the old
corona wire [B].
7. Clean the endblocks, endblock covers and
the corona unit casing with a blower brush
and dry cloth.
8. Hook the corona wire onto the front anchor
post.
9.
Hook the tension spring onto the wire; then,
hook it onto the rear terminal. (The wire
junction [C] should be positioned inside the
rear endblock [D].)
10. Reassemble the charge corona unit.
Make sure that the corona wire [E] is posi-
tioned between the cleaner pads
check the wire cleaner movement
7.
[F]. Also,
using SP-
31 March '87
3-35