Component Installation Procedure; Component Installation Procedure - Ricoh FT556 Service Manual

31 March 1987

COMPONENT INSTALLATION PROCEDURE

1. Paper Bank
2. Large Capacity Tray
3. Copier
4. Auto Duplex Unit
5. Sorter
6. Document Feeder
The illustration to the right shows the relative or-
der of installing the different components to the
base copier to obtain the system configuration
desired by the customer. This installation proce-
dure has been tailored to this illustration. The in-
stallation of components should start from the
lower numbered components and progress to
higher numbered components.
NOTE: When not instaIling the duplex unit or the
sorter save the duplex unit or sorter key
tops and key covers for future use.
1-6