Ricoh FT556 Service Manual page 38

6. Remove the fusing
screws).
7. Use one of the screws removed in the pre-
vious step to secure the inner cover [B].
8. Pull out the fusing unit [C] to the lock posi-
tion and remove the fusing unit cover [D] (2
screws).
9. Prime the oil supply pad [E] with silicon oil.
10. Fill the oil tank [F] with silicon oil.
11. Manually operate the oil pump lever [G] and
confirm proper operation and condition of
the silicon oil supply system.
12. Reassemble the fusing unit and return it to
its original position.
lock plate [A] (2
1-27