Ricoh FT556 Service Manual page 80

5. Lower the PCB plate [A] (2 screws).
6. Insert the ARDF fixing plate [B] into the
DF mounting plate (4 screws - M5 x 8).
7. Temporarily secure the two screws [C]
(pan head screws with washer M4 x 8) to
the holes [D] on the ARDF fixing plate,
and install the ARDF.
with the lift switch actuator plate [E]. (3
pan head screws - M4 x 8 [F], 1 flat head
screw - M4 x 8 [G])
8. Remove the ARDF cover [H] (4 screws),
and remove the shipping cushion [l] from
between the stopper solenoid [J] and the
ARDF side plate [K].
Then, secure it
31 March 1987
1-69