Programming Options - Autostart AS-6010 TW-A Installation Manual

Hide thumbs Also See for AS-6010 TW-A:
Table of Contents

Advertisement

Once you access a particular programming Mode, you will automatically start at Functi on 1. Once
you select one of the Options of Function 1, you will automatically be taken to the next Function.
To select one of the four Options of any given Function, press the corresponding button on the
Transmitter:
In each Function, once an Option has been selected the Parking Lights will flash 1, 2, 3 or 4 times
(depending on the selected Option). Please note that the different Functions within any particular
Mode can only be accessed sequentially: the Programming Centre will move from Function 1 to
Function 2, then to Function 3, and so on. Therefore, whenever you access a particular Mode, be
prepared to re-configure all the Functions of that Mode in ascending order.

Programming Options

MODE 1
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1*
OPTION 2
OPTION 3
OPTION 4
FUNCTION 2 – Secure Lock
OPTION 1*
OPTION 2
OPTION 3
OPTION 4
FUNCTION 3 – Door lock pulse timing
OPTION 1*
OPTION 2
OPTION 3
OPTION 4
FUNCTION 4 –
OPTION 1*
OPTION 2
OPTION 3
OPTION 4
FUNCTION 5 –
OPTION 1*
OPTION 2
OPTION 3
OPTION 4
Installation Guide
button ...................... to access Option 1
LOCK
button .................. to access Option 2
UNLOCK
button .................... to access Option 3
TRUNK
button ............. to access Option 4
START/STOP
Table 4: Accessing options
* INDICATES DEFAULT SETTING
Ignition Lock
Ignition Lock
Ignition
UNLOCK ONLY
Ignition
LOCK ONLY
Secure Lock
Secure Lock
Secure Lock
Secure Lock
7/10-sec. Lock/Unlock pulses
4-sec. Lock/Unlock pulses
7/10-sec. Lock pulse and two 1/4-sec. Unlock pulses
1/10-sec. Lock/Unlock pulses
Programming
AUX 3
Constant output while the
1-sec. output when
or under remote run
Output with Disarm and Rearm pulses (the Alarm is disarmed while the
Trunk is open; the Alarm rearms automatically afterward)
1-sec. output when
or under remote run
Programming
AUX 2
Priority Door Access on 1
with unlocking of all doors on each subsequent
Toggle
ON/OFF
Constant output while the
Priority Door Access on 1
unlocking of all doors on each subsequent even
DISABLED
ENABLED
(1-sec. Disarm pulse)
DISABLED
in Smart Mode
ENABLED
(1/2-sec. Disarm pulse)
DISABLED
in Standard Mode
ENABLED
TRUNK
button is pressed for 3 sec. with Ignition
TRUNK
button is pressed for 3 sec. with Ignition
TRUNK
st
UNLOCK
(with 30-second timeout)
and
LOCK
st
UNLOCK
button is pressed
UNLOCK
buttons are pressed
UNLOCK
and on each subsequent odd
; with
UNLOCK
OFF
OFF
; with
CAR FINDER
with
UNLOCK
CAR FINDER
P. 11

Advertisement

Table of Contents
loading

Table of Contents