Introduction; Included In The Kit - Autostart AS-6010 TW-A Installation Manual

Introduction

This guide contains all the information relevant and necessary for the installation of the alarm and
remote starter system. Most of the features of this product are explained in the user guide.
Therefore, if you need detailed information about a feature of the product, we recommend that you
refer to the user guide.

Included in the Kit

Please carefully read the installation guide before beginning the installation, especially the harness
description section and the programming options. It is very important that you familiarize yourself
with the programming and the operation of the system, even if you have already installed a similar
system in the past. There are many innovative features that you may overlook if you do not read
this guide. Prior to the installation, make sure that all the hardware components required to install
the system are in the box.
The following is a list of components included in the kit:
• 1
– Remote Starter and Alarm System Control Unit
• 1
– Antenna Interconnect Cable1
• 1
– Long-range Transceiver
• 1
– multi-channel 5-button Remote Controls
• 1
– plug-in dual-zone Shock Sensor
• 1
– plug-in L.E.D.
• 1
– high-power 120-dB 6-tone Siren
• 1
– six-pin 14 AWG Harness (Ignition Harness)
• 1
– five-pin 18 AWG Harness (Main Harness)
• 1
– twelve-pin 22 AWG Harness (Accessories Harness)
• 1
– two-pin 22 AWG Harness (Accessories Harness)
• 1
– parts bag: a Hood Pin-switch, a Connector and a Warning Label
• 1
– User Guide
• 1
– plug-in Valet Button
INDUSTRY CANADA USER NOTICE:
Operation is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause undesired
operation of the device. To reduce potential radio interference to other users, the antenna type
and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not
more than that required for successful communication.
FCC USER NOTICE:
The manufacturer is not responsible for any radio or TV interference caused by unauthorised
modifications to this equipment. Such modifications could void the user's authority to operate the
equipment.
Installation Guide
P. 3