Server Technology switched pro2 User Manual page 85

What Data Does Trending Measure?

REQUIREMENTS
For the Trending feature to occur and display (for viewing only) on the PRO2 GUI at System > Trending, SNTP
must be enabled to keep track of when daily measurements are taken.
Certain measurements for PIPS and POPS (if POPS is present) are tracked by the Trending feature:
For all PIPS cords/phases/lines, the following measurements are tracked:
•
Phase voltage
•
Line current
•
Cord watts
•
Cord power factor
 WHAT IS MEASURED?
For all POPS outlets, the following measurements are tracked:
•
Current
•
Watts
•
Power factor
 ADDITIONAL TRACKED METRICS
For all of the above PIPS/POPS measurements, the following metrics will also be tracked:
•
Minimum measurement
•
Maximum measurement
•
"In-use average" measurement
Note: PIPS is a standard feature on all PRO2 units, but if the unit does not have POPS, then only the PIPS
measurements will be
 REQUIREMENTS
For the Trending feature to occur and display (for viewing only) on the PRO2 GUI at System > Trending, SNTP
must be enabled to keep track of when daily measurements are taken.
Certain measurements for PIPS and POPS (if POPS is present) are tracked by the Trending feature:
For all PIPS cords/phases/lines, the following measurements are tracked:
•
Phase voltage
•
Line current
•
Cord watts
•
Cord power factor
Using the Web Interface
tracked.
Switched PRO2 – User Guide
•
85