Server Technology switched pro2 User Manual page 166

Hide thumbs Also See for switched pro2:
Table of Contents

Advertisement

set outlet
Sets outlet configuration values.
Command Syntax
set outlet branchevent [disabled | enabled] <name | id | ALL>
set outlet chglogging [disabled | enabled]
set outlet email [disabled | enabled] <name | id | ALL>
set outlet load [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set outlet load hyst <value>
set outlet name <name | id> <new name>
set outlet snmpt [disabled | enabled] <name | id | ALL>
set outlet watts [alarmhi | alarmlo | warnhi | warnlo] <name | id | ALL> <value>
set outlet watts hyst <value>
For Switched PRO2 products only:
set outlet extondelay <name | id | ALL> <value>
set outlet host <name | id> <hostname>
set outlet lock [disabled | enabled] <name | id | ALL>
set outlet rebootdelay <value>
set outlet script [disabled | enabled] <name | id | ALL>
set outlet script delay <name | id | ALL> <value>
set outlet seqdelay <value>
set outlet shutdown [disabled | enabled] <name | id | ALL>
set outlet shutdown delay <name | id | ALL> <value>
set outlet wakeup [on | off | last] <name | id | ALL>
For the enabled Smart Load Shedding feature:
set outlet contactevent [disabled | enabled] <name | id | ALL> <contact sensor name | id |
ALL>
set outlet lineevent [disabled | enabled] <name | id | ALL>
set outlet sensoraction [off | on]
set outlet tempevent [disabled | enabled] <name | id | ALL> <temp sensor name | id | ALL>
set outlet upsevent [disabled | enabled] <name | id | ALL>
set outlet waterevent [disabled | enabled] <name | id | ALL> <water sensor name | id |
ALL>
For AC products only:
set outlet pf [alarmlo | warnlo] <name | id | ALL> <value>
set outlet pf hyst <value>
Parameters
The set outlet command uses the following parameters:
Using the Command Line Interface (CLI)
branchevent
Sets if load shedding (due to branch events) is allowed for an outlet.
chglogging
Sets logging for system outlet state changes
contactevent
Sets if load shedding (due to contact sensor events) is allowed for an
outlet.
email
Sets email notifications for outlet events.
Switched PRO2 – User Guide
166

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the switched pro2 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents