Server Technology switched pro2 User Manual page 197

show sntp
Shows SNTP configuration values.
Command Syntax
show sntp
Command Access
Admin level only
Example
Switched CDU: show sntp
show syslog
Shows Syslog configuration values.
Command Syntax
show syslog
Command Access
Admin level only
Example
Switched CDU: show syslog
Using the Command Line Interface (CLI)
SNTP Configuration
Local Date/Time:
Primary Host:
Secondary Host:
Local GMT Offset:
Daylight Saving Time: enabled
DST Start:
DST End:
SYSLOG Configuration
Host 1: <not set>
Host 2: <not set>
Port: 514
Protocol: RFC3164
Debug Messaging: disabled
Switched PRO2 – User Guide
2014-05-06 14:30:41 (DST)
2.servertech.pool.ntp.org
1.servertech.pool.ntp.org
-8:00 hours
2nd Sunday in March at 02:00:00
1st Sunday in November at 02:00:00
•
197