Sub-Parameters
The set ftp command uses the following sub-parameters:
Command Access
Admin level only; no access in Demo mode
set http
Sets HTTP configuration values.
Command Syntax
set http [disabled | enabled]
set http port <port>
Parameters
The set http command uses the following parameter:
Command Access
Admin level only; no access in Demo mode
set https
Sets HTTPS configuration values.
Command Syntax
set https [disabled | enabled]
set https port <port>
set https usercert [disabled | enabled]
set https userpass <passphrase>
Parameters
The set https command uses the following parameters:
Command Access
Admin level only; no access in Demo mode
Using the Command Line Interface (CLI)
day
Sets the day of the week to automatically update system firmware.
hour
Sets the hour of the day to automatically update system firmware.
port
Sets the port for HTTP connections. 1-65535 (default 443).
port
Sets the port for HTTPS connections.1-65535 (default 80).
usercert
Sets to use user-provided certificates instead of system self-signed
certificates.
userpass
Sets the pass phrase for user-provided certificates. 0-63 characters.
Switched PRO2 – User Guide
•
160
Need help?
Do you have a question about the switched pro2 and is the answer not in the manual?