The User Interfaces; Usernames And Passwords - Server Technology switched pro2 User Manual

The User Interfaces

The Switched PRO2 offers two built-in user interfaces:
•
Web interface (GUI) accessed via HTTP-enabled Ethernet connections.
•
Command Line Interface (CLI) for serial and Telnet connections.
Both interfaces allow power monitoring of PIPS/POPS data points, temperature/humidity measurements,
system/network configuration, outlet control, ST Eye Bluetooth
numerous other operations for the Switched PRO2.
Either interface can be used as preferred; most firmware operations can be performed on GUI screens or by CLI
commands on the command line. When using either interface, the availability of firmware functions for your user
login account depends on your current user access rights as granted by the system administrator.

Usernames and Passwords

The Switched PRO2 is shipped with one default administrative user account (username/password is admn/admn).
There is no "i" in the admn username or password.
Only an administrative user can manage user accounts, such as creating new user accounts, removing user
accounts, and changing user passwords.
The PRO2 supports a maximum of 112 defined user accounts with the following restrictions:
User Account Length
Usernames 1-32 characters
Passwords 1-32 characters
Note: For security, Server Technology recommends first creating a new user account with administrative
rights, and then removing the default admn account.
Getting Started with the Firmware
®
connection, user account management, and
Case-Sensitive Spaces Allowed
No No
Yes Yes
Switched PRO2 – User Guide
•
21