Server Technology switched pro2 User Manual page 151

remove user
Removes a local user from the system.
Command Syntax
remove ups <name>
Command Access
Admin level only
restart
Restarts the system.
Command Syntax
restart [factkeepnet | factory | ftpload | newx509cert | newsshkeys | normal]
Parameters
The restart command uses the following parameters.
Note: None of the parameters in the following table performs a normal system restart.
Command Access
Admin level only; no access in Demo mode
senstat
Displays the latest status and metrics for all sensors in the system.
Command Syntax
senstat
Command Access
System monitor access
Using the Command Line Interface (CLI)
factkeepnet Removes all system configurations except network configuration.
factory Removes all system configurations.
ftpload Performs a system update through an FTP load.
newx509cert Creates a new self-signed SSL X509 certificate.
newsshkeys Creates a new set of public and private SSH keys.
normal Performs a normal system restart.
Switched PRO2 – User Guide
•
151