Table of Contents
Advertisement
System Component
Copper RJ-45 ports
Ethernet management port
Port status
Other Ports
System Component
Serial console port
USB port
LEDs
System Component
System power LED
System status LED
Ethernet management port link
status LEDs
FC port status LEDs
GbE RJ-45 link status LEDs
GbE SFP+ port status LEDs
Power supply and fan assembly
status LEDs
Other Cables and Connectors
System Component
Serial cable
RJ-45 to DB9 adapter
RJ-45 connector
Weight and Physical Dimensions
Empty weight refers to the device with two power supply and fan assemblies installed but no SFP+ transceivers.
Brocade 7810 Extension Switch Hardware Installation Guide
7810-IG101
Description
Two GbE ports that support 1GbE copper RJ-45 CAT5 transceivers.
One RJ-45 with 10/100/1000Mb/s auto-negotiating capability.
RJ-45 management port — two unicolor LEDs (green).
RJ-45 GbE ports — two unicolor LEDs (green).
SFP GbE ports — one bicolor LED (amber/green).
Description
One three-wire (Tx, Rx, GND) UART serial port.
One external USB port.
Description
One green system power status LED (upper) on the port side.
One bicolor (green/amber) system status LED (lower) on the port side.
One unicolor (green) link status LED on the left of the RJ-45 connector.
One unicolor (green) link activity LED on the right side of the RJ-45 connector.
Twelve bicolor (green/amber) port status LEDs. One for each SFP+ port.
One unicolor (green) link status LED on left side of the RJ-45 connector.
One unicolor (green) link activity LED on right side of the RJ-45 connector.
Six bicolor (green/amber) port status LEDs. One for each SFP+ port.
One green power supply and fan assembly status LED on each power supply and fan assembly on the nonport
side of the switch.
Description
RJ-45 console cable.
RJ-45 to DB9 adapter for the console cable.
RJ-45 connector for the serial port.
Weight and Physical Dimensions
73
Advertisement
Table of Contents
