Installing The Output Tray - Microtek mii-900 plus User Manual

Installing the Output Tray

Coming with your digitizer, there are two kinds and separated Output Trays which
store the stacked X-ray films which have been digitized. One of them is called
Output Guide, used to guide the digitized materials staying on the table. The other
is called Output Basket, used to store and keep the digitized materials in a basket.
You may use only one of them as an output tray at a time. Before using them with
your digitizer, you need to assembly them onto the digitizer.
1. Look for two sets of Output Tray Holes
at both ends of the front-bottom of the
digitizer.
2. Insert and push down both sides of the Output Guide into its compartment
holes, making sure the Output Guide snaps into place.
Or, Insert and push down both sides of the Output Basket into its
compartment holes, making sure the Output Basket snaps into place.
Output Guide
Output Basket
MII-900 Plus User's Manual 21