Microtek mii-900 plus User Manual page 6

•
•
•
Using the Digitizer
•
•
Maintenance and
•
•
•
•
6 MII-900 Plus User's Manual
Do not use the digitizer near water. Never spill liquid of any kinds on the
product, or it may result in electric shock or other hazards.
This digitizer should be situated away from heat sources such as radiators,
heat registers, stoves, or other products (including amplifiers) that produce
heat.
Do not store the digitizer in which it may be exposed to direct sunlight.
Before using the digitizer, make sure the area of the front cover is clear from
any objects that may cause jams inside.
When using the digitizer, if your hairs have been jammed into the front cover
of the digitizer, turn off the power switch immediately. Do not attend to
remove your hairs from the front cover when the digitizer is still turned on.
Service:
When the digitizer is going to be cleaned, ensure to turn off the power of each
device and unplug the power cable from the AC outlet.
When you need a repair service, unplug the digitizer from the power outlet
and consult qualified service personnel.
When replacement parts are required, use replacement parts that are specified
by the manufacturer or have the same characteristics as the original parts.
For safety reasons, ensure to inspect the device before using it. In addition,
carrying out a regular inspection at least once a year.