Using The 12.5" X 3 1/3" Film Holder - Microtek mii-900 plus User Manual

B. Using the 12.5" x 3 1/3" Film Holder
To scan 12.5" x 3 1/3" industrial film, use the 12.5" x 3 1/3" Film Holder,
which can hold up to one piece of the 12.5" x 3 1/3" industrial RT X-ray films at
a time.
1. Install the Feed Tray onto your
digitizer before using it. Refer to the
front sections "Installing the Feed
Tray" for the detail.
2. Load the film face up inside the
holder. Slide the film along the slot
of the holder until the film is fully
loaded.
3. Load and insert the 12.5" x 3 1/3"
Film Holder with loaded film into the
Feed Tray, with the side to be
scanned facing up and with the top
of the film directing upwardly.
Push the holder into the tray until the
edge of it touches the bottom edge of
the Feed Tray.
Make sure that the Light Shield has
been pull up.
Feed Tray
Microtek logo
MII-900 Plus User's Manual
12.5" x 3 1/3" Film Holder
31