Taking a Closer Look
Front / Top / Bottom View
No.
Names of Parts
1
Feed Tray Holes
2
Power Switch
3
Fastenings of Light Shield
4
Hook of Light Shield
5
Front Cover
6
Green/Orange LEDs
7
Output Tray Holes
8
Release Buttons
18
MII-900 Plus User's Manual
Functions of Parts
Uses to hook the Feed Tray onto the digitizer.
Turns the digitizer on or off.
Uses to fasten the Light Shield into Guide Arms on the Input Tray.
Uses to pull the Light Shield up.
Uses to cover inner components of the digitizer.
Indicates the status of the digitizer. For more details, refer to the
"Troubleshooting" section of this manual.
Uses to hook either the Output Guide or the Output Basket onto the
digitizer.
Releases the front cover to open the lamp holder. There are two
Release buttons located on each side of the front cover. Press the
buttons down simultaneously to release the front cover.