Cleaning The Glass And Components On The - Microtek mii-900 plus User Manual

Cleaning the Glass and Components on the

Front Cover
There is one more piece of glass located on the inner side of the front cover of the
digitizer. To clean it, please remove it from the front cover first.
1. Push down two buttons at both sides of
the front cover of the digitizer and open the
front cover. Locate the glass on the inner
side of the front cover.
When opening the front cover, support the
both sides of the front cover with your
hands, avoiding suddenly falling down of
the front cover.
2. Find a perforation at the left of the glass. Use it to pull out the glass, shown
as in the graph below.
Pull up the Light
Shield before
pulling out the
glass
Note: Before pulling out the glass, make sure that the Light Shield has been
pull up.
Front cover
Release button
Glass on the
inner side of
the front cover
MII-900 Plus User's Manual 37