Scanning Industrial RT X-ray Films
1. Follow the procedures for "A. Using the 8.5" x 4.5" Film Holder" to load the
2. Follow the procedures (steps 2 through 8) for "Scanning Industrial RT X-ray
Settings window
32
MII-900 Plus User's Manual
industrial film into the digitizer's Feed Tray.
Films" to launch the ScanWizard Industry software, to specify your scanning
requirements and to start scanning.
•
In step 6, instead, select the correct
holder size to be used and scanned in
the Scan Frame drop-down menu. You
will see a flashing frame (marquee)
around the selected area.
Preview window
Scan frame
(enclosed by
red dotted lines)