Step 2: Installing The Software - Microtek MIL-800XL Plus User Manual

Step 2: Installing the Software

Important: Do not remove the yellow stickers from your digitizer until you are
told to do so. You must install all software before connecting your digitizer.
Always close any open programs and turn off Anti-virus utilities before installing
software.
1. Turn on your computer.
2. Place the MII-800XL Plus CD
into your CD-ROM drive.
3. Follow the on-screen
instructions to install the driver
and software.
NOTE: If the Microtek Software
Installer screen does not come
up automatically, double-click
the following in succession:
"My Computer"; the CD-ROM
icon; then cdsetup.exe to start
the installer program.
4. To install the software on the MII-800XL
PLUS CD, click each software program in
the order that it appears on the screen to
install, and follow the on-screen
instructions.
5. Click EXIT on the Microtek Software
Installer screen when all the software has
been installed.
6. Restart your computer.
MII-800XL Plus User's Manual 17