Scanning Industrial Rt X-Ray Films - Microtek mii-900 plus User Manual

Scanning Industrial RT X-ray Films

ScanWizard Industry is a scanning software designed by Microtek for Industrial
X-ray films scanning used for an industrial purpose. Its user-friendly interface
enables you to easily start the scanning process and finish all the scan jobs. Refer
to the ScanWizard Industry software manual for more details.
1. Follow the procedures for "Positioning Industrial RT X-ray Film with the Light
Shield" to load the film into the digitizer's Feed Tray.
2. Launch ScanWizard Industry (either as a stand-alone by clicking the program
icon, or by using the "File-Import" or "Scan" command from an application
program).
Note: If it is your first time to turn on the
digitizer and to launch the program, if the
Light Shield is not pull up, the program
will prompt a window to remind you.
Bring up the Light Shield and click the
Calibration button. Then, the scanner will
start to calibrate.
When the calibration is done, click the OK
button to bring in main windows of
ScanWizard Industry program.
3. Click the Overview button to perform a preliminary scan of the image, which
will appear in the Preview window.
4. Select your image output type in the Type
drop-down menu.
– Select Gray Scale to scan the image in
8-bit grayscale. This is also the default setting of the software program.
– Select Gray Scale (16-bit) to scan the image in 16-bit grayscale.
5. Select your desired image output
resolution in the Resolution drop-down
menu. The default setting is 300 dpi.
6. Select the Scan Frame tool from the
Toolbar in the Preview window, and
choose the area to be scanned by dragging
a rectangle around it. You will see a
flashing frame (marquee) around the
selected area.
MII-900 Plus User's Manual 27