Cleaning The Rollers; Maintenance - Microtek mii-900 plus User Manual

Cleaning the Rollers

Prolonged used of the digitizer may result in accumulation of ink and other residue
on the feeder's rollers, affecting their efficiency. Clean the rollers periodically to
maintain performance.
Rollers are found in two areas of the MII-900 Plus: Directly on the digitizer, and
on the side of the front cover.
To clean the two sets of rollers:
1. Push down two buttons at both sides of the front cover of the digitizer and
2. Clean the rollers with a lint-free cloth or a swab moistened with alcohol or

Maintenance

After usage for a period of time, the parts inside your digitizer, such as rollers or
light source, may become worn out, and a problem such as insufficient light
supply may occur. In this cases, contact your local dealers or wholesales for the
maintenance services.
Note: Your digitizer need a professional to perform the required service or
maintenance. Do not attend to fix or perform the maintenance by yourself, or it
may cause dangers to you or the digitizer.
open the front cover.
When opening the front cover, support the both sides of the front cover with
your hands, avoiding suddenly falling down of the front cover.
ECO cleaner, as shown in the graphic below. Remember to clean the rollers on
the digitizer and the front cover at the same time.
Rollers on the digitizer
Rollers on the front cover
of the digitizer
MII-900 Plus User's Manual 39