Table of Contents
Advertisement
Safety Precautions
Before using your digitizer, read the following safety guides carefully, which detail
the proper operation of the digitizer and its accessories to prevent injuries or
damage to users or equipment.
Meanings of Symbol Signs
CAUTION
WARNING
Power Supply:
•
Use a power source only with a power rating specified on the marking label.
•
Ensure to turn off the power of each device before connecting or
disconnecting the cables.
•
Insert the plug completely into the outlet, as a loose connection may cause
arcing and result in fire.
•
Ensure to hold the plug or connector to disconnect the cable; otherwise, if
you pull the cable only, it may damage the core wire and result in fire or
electric shock.
•
Place and route the power supply cord such that it is not likely to be walked
on or pinched by items placed upon or against them, paying particular
attention to the cord near the power plugs, convenience receptacles, and at
the point where it exits from the outlet.
•
When the digitizer is left unattended and unused for long periods of time,
unplug it from the wall outlet.
Moving and Storing the Film Digitizer:
•
Always ensure that the digitizer is stored properly before shipping or moving
it. Quick stops, excessive force, and uneven surfaces may cause the product
to overturn when moving.
•
Do not hit or drop the digitizer. The digitizer may be damaged if it receives a
strong jolt, which may result in fire or electric shock if the digitizer is used
without being repaired.
•
Do not place the digitizer on any slippery, slanted, or unstable surface. The
product may slide or fall, causing serious injury to people as well as serious
damage to the product.
This indicates hazardous situation which, if not payed
attention, could result injury or damage to users or
equipment.
This indicates hazardous situation which, if not payed
attention, could result serious injury or death to users.
MII-900 Plus User's Manual
5
Advertisement
Table of Contents
