Bosch DSA E-Series (E2700) Installation Manual page 65

DSA E-Series (E2700)
9 ESM service action
allowed
10 ESM service action
required
11 ESM power
12 Seven-segment tray
ID
LEDs on the AC power canister
Location LED
1 Power standby
power
2 Power DC power
3 Power service
action allowed
4 Power service
action required
5 Power AC power
Bosch Sicherheitssysteme GmbH
Turning on the power and checking for problems in an E2700 controller-drive tray configuration | en
Blue
Amber
Green
Green
DC
!
1 2 3 4
Color
Green The drive tray is in Standby
mode and DC power is not
available.
Green DC power from the power
canister is available.
Blue The power canister can be
removed safely from the drive
tray.
Amber A fault exists within the power
canister.
Green AC power to the power
canister is present.
The ESM can be removed
safely from the drive tray.
A fault exists within the ESM.
(This LED defaults on at
power up. This LED turns off
after the software has
completed its power up self-
test sequence.)
12 V power to the ESM is
present.
See Things to know – seven-
segment display for the ESMs
on the drive trays, page 74.
AC
5
On
Installation manual
The ESM cannot be removed
safely from the drive tray.
Normal status.
Power is not present to the
ESM.
Not applicable.
92025-01
Off
The drive tray is not in Standby
mode and DC power is
available.
DC power from the power
canister is not available.
The power canister cannot be
removed safely from the drive
tray.
Normal status.
AC power to the power
canisteris not present.
2015.10 | V2 | DOC
65