Tools And Other Items; Things To Know - Copper Cables And Sas Cables - Bosch DSA E-Series (E2700) Installation Manual

DSA E-Series (E2700)
4.2.3

Tools and other items

You may need the following equipment:
–
–
–
–
–
–
–
4.3 Things to know – copper cables and sas cables
The controller-drive tray supports SAS drive connections and SAS, or iSCSI host connections.
Notice!
Your cables might look slightly different from the ones shown. The differences do not affect
the performance.
10-Gb/s iSCSI cable connection
Bosch Sicherheitssysteme GmbH
Ethernet cable
SAS cables
The HD Mini-SAS (SFF-8644) to Mini-SAS (SFF-8088) SAS cables
connect each controller expansion port to the drive tray(s).
Serial cable
This cable is used for support only. You do not need to connect it
during initial installation.
DB9-to-PS2 adapter cable
This cable adapts the DB9 connector on commercially available
serial cables to the PS2 connector on the ESM for drive trays in
the storage array. This cable is used for support only. You do not
need to connect it during installation.
Mini-USB connector
This cable adapts the DB9 connector on commercially available
serial cables to the PS2 connector on the controller. This cable is
used for support only. You do not need to connect it during
installation.
Labels: Help you to identify cable connections and lets you more easily trace cables from
one tray to another.
A cart: Holds the tray and components.
A mechanical lift (optional)
A Phillips screwdriver
A flat-blade screwdriver
An anti-static protection
A flashlight
Preparing for an E2700 controller-drive tray installation | en
Installation manual
15
2015.10 | V2 | DOC