Bosch DSA E-Series (E2700) Installation Manual page 30

30 en | Connecting the E2700 controller-drive tray to the hosts
Maximum expansion (dual simplex controller configuration)
Example: for DE1600 (only 3 expansions for DE6600)
Notice!
You can connect the E2700 controller-drive tray to a maximum of 7 DE1600 expansion drive
trays or to a maximum of 3 DE6600 expansion drive trays. No mixed configurations expansion
drive trays are allowed.
To connect the components:
1.
2.
3.
2015.10 | V2 | DOC
Plug either the SAS cable or copper cables into the controller.
Plug the cable either into an HBA in the host (direct topology) or into a switch (fabric
topology).
Affix a label to each end of the cable with the relevant information. A label is very
important if you need to disconnect cables to service a controller. Include this
information on the labels:
Installation manual
DSA E-Series (E2700)
Bosch Sicherheitssysteme GmbH